Latte Art Style Earrings design by Kimura Premium

Products' information based on November, 2024.

【Material / Tool】
"Sun Drop" UV-LED Resin
UV-LED Coating Resin "Star Drop Gloss"
Soft Mold [Round Plate]
Jewel Color for UV & UV-LED Curing Resin [Milk Tea, Milk Cocoa, White]
Mixing Stick
Jewel Color Mixing Palette [S, mini]
UV-LED Light
Earing parts
Adhesive

  1. 1.

    Put some drops of Milk Tea colorant into UV-LED Resin to make darker and mix it well with a stick.

  2. 2.

    Fill the 20 mm size round mold with tea colored resin to the height of one-third of the entire mold.

  3. 3.

    Cure with UV-LED light. Turn over and further expose to light to firmly cure.

  4. 4.

    Fill the resin to the height of two-third of the entire mold. Cure firmly with a longer light exposure.

  5. 5.

    Fill the resin to the top of the mold and let it cure for a long time. Remove it from the mold. Make another one of the same.

  6. 6.

    Make brown resin with "Milk Cocoa " colorant. Then make white colored resin.

  7. 7.

    Apply a thin layer of the tea colored resin_step (1) to the entire surface of the part (5).

  8. 8.

    Place white resin from step (6) on top of it in the center.
    Mix it with a stick so that it spreads outward to create a gradation.

  9. 9.

    Quickly draw four horizontal lines on top of it with Step(6) brown resin.

  10. 10.

    With a stick, quickly draw a pattern as if drawing a line from the top to the center, left, and right.

  11. 11.

    Cure it under the UV-LED lamp.

  12. 12.

    Apply a thin layer of coating resin on the surface and cure it. Attach earring clasps to the back side with adhesive.

Go Back