Gloss & Matte Drop Earrings
design by Kimura Premium

【Materials / Tools】
Star Drop UV-LED Resin Hard Type
UV-LED Coating Resin "Star Drop" Gloss and Matte
Flock Tip Applicators
} UV-LED Lamp
3D Water Drop Silicone Mold
Jewel Color Mixing Palette
Mixing Stick
Earring Parts
Chain
Eyebolts
C shaped Jumprings

  1. 1.

    Put a small amount of resin on the tip of the stick and fill around the inner projection of the mold. Repeat a couple times.

  2. 2.

    Check for air bubbles from underside of mold.

  3. 3.

    Pour the resin so that it does not leak just below the spout, then cure it with a UV-LED lamp. Remove from mold when cooled.

  4. 4.

    Deburr on the drop with sandpaper and apply resin to the concave area on the underside of the drop and shape it.

  5. 5.

    Put a small amount of resin on the tip of the bolt and the hole.

  6. 6.

    Stick the bolt in the hole and use a UV-LED lamp to glue it with resin.

Glossy texture

  1. 7.

    Apply the gloss coating resin to the entire part with a flock tip.

  2. 8.

    Cure it with UV-LED light while holding.

  3. 9.

    Repeat step 7 & 8.

Matte texture

  1. 10.

    Apply the matte coating resin to the entire part with a flock tip.Cure it with UV-LED light while holding.

  2. 11.

    Repeat step 10.

  3. 12.

    Attach accesory parts and finish the earrings.

Go Back