UV-LED Coating Resin Dip 70g［Matte］

New , Resin , Resin Pigments

#403404
JAN：4902498734046
Bottle size：φ69.4mm×H75.7mm
Volume：70g
Gross Weight：118g
Color：Clear（Matte coat）
Ingredients：Acrylic UV LED curable resin

＜Light source＞
UV-LED Light (wavelength 405nm)
UV Light (wavelength 365nm)

Made in Japan
Release：October 18th, 2024

3,200 JPY

BUY NOW

UV-LED Coating resin "Star Drop Matte" is specialized for surface finishing of art works. Matte type is available in three sizes, 10g and 30g and 70g The resins cure quickly after applications and produce hard finishes with no surface stickiness. Low viscosity flowing liquid resin New resin bottle allows you to dip resin piece directly into the bottle as it comes a deep contaier.

Features
・Coating resin that can be dipped directly into the bottle.
・Large 70g capacity
・Deep size container with an inner mouth diameter of 57mm x inner height of approx. 67mm

  • Highly transparency, low viscosity liquid resin for coating The light liquid makes it easy to apply thinly. Also, there is little unpleasant odor characteristic of resin.

  • Yellowing-resistant coating resin* The UV-LED Coating Resin has strong yellowing resistance after curing.
    *Discoloration characteristic of resin may occur due to aging.

  • Quick curing time Just 30 seconds curing by the UV-LED light.
    *Curing time depends on the work environment.

  • Scratch-resistant and shines like glass The coating strengthens the surface and provides a hard finish.
    No stickiness after curing due to coating.

Features

■Low viscosity flowing liquid resin
■Hard finish and scratch resistant
■Easy to apply thinly
■Less unpleasant odor characteristic of resin
■Quick curing time
■No stickiness after curing due to coating
■Yellowing-resistant coating resin*
■Beautiful finish when dipped directly into the liquid.
■Brush marks do not stick to the surface, and even can be applied even the detailed areas
■A small amount can be put out with a nozzle
*Discoloration characteristic of resin may occur due to aging.

Coating liquid for thin coating. It is not suitable for thicker works.

Curing Time

■UV-LED light (6W-9W)　30 - 120 seconds
■UV light (36W)　2 - 4 minutes
■Bright sunlight　30 - 120 seconds
■Cloudy sunlight　3 - 10 minutes
*Curing time depends on the work environment.

Caution

■Temperature becomes high during curing. Do not touch it until it cools down.
■Take care to prevent the resin from adhering to skin, clothing, furniture, etc.
■Coating liquid for thin coating.　It is not suitable for thicker works.
■The resin begins a slow curing reaction even under fluorescent light in a room or in the shade near the window.
■Do not leave this resin out for long periods of time.
■People with sensitive skin or those working in environments requiring caution should wear gloves and glasses.
■White gas may rarely occur during curing.
This is due to the reaction of some of the resin components to vaporization caused by the curing heat. It is not particularly harmful.
Please ventilate as usual.
■When applied to Moon Drop resin, the film may peel off due to its unique surface hardness. It is recommended to scratch the surface with sand paper #600 - #1000 before application.

For matte type, shake the bottle gently and slowly before use.
If not used for an extended period of time, the matting agent will precipitate. Use the included flocking tip to slowly stir the mixture before use.

How to Use

Coating in dip resin bottle

  • 1

    Hold the cured resin with a clip and dip it directly into the bottle.

  • 2

    Take it out and pour off excess resin.
    When applying a thin coating, excess resin can be removed by blowing air from a hand-heater.

  • 3

    Expose the resin work to a UV-LED light for 360 degrees while turning it.
    The dip resin bottle should be placed away from the light.

  • 4

    After use, wipe around the bottle and close the lid after putting on the inner cap.
    If the cap does not close properly, close the lid from the top with keeping the cap in place.

Use the Dip Resin for

■Dipping various wire shapes and other small, dried objects directly in.

・Use gloves to avoid skin contact with resin.
・Close the lid when not in use to avoid light and dust.
・Remove as much dust and debris as possible before dipping.
・Hold the bottle down with one hand and slowly lift the cap to open to prevent the resin from splashing out.

Go Back