2024 October New Products　UV-LED Coating Resin Star Drop

Release on October 18th, 2024

New resin bottle allows you
to dip resin piece
directly into the bottle
as it comes a deep contaier.

Coating resin that can be dipped directly into the bottle.
Large 70g capacity
Deep size container with an inner mouth diameter
of 57mm x inner height of approx. 67mm

  • UV-LED Coating Resin
    Dip 70g［Gloss］

    3,200 JPY without tax

    #403403／JAN：4902498734039
    Weight: 118g
    Bottle size: φ69.4mm×H75.7mm

    VIEW DETAIL

  • UV-LED Coating Resin
    Dip 70g［Matte］

    3,200 JPY without tax

    #403404／JAN：4902498734046
    Weight: 118g
    Bottle size: φ69.4mm×H75.7mm

    VIEW DETAIL

  • The amount of resin covers 1/2 of the size of the bottle.

  • After use, wipe around the bottle and close the lid after putting on the inner cap.
    If the cap does not close properly, close the lid from the top with keeping the cap in place.

・Use gloves to avoid skin contact with resin.
・Close the lid when not in use to avoid light and dust.
・Remove as much dust and debris as possible before dipping.
・Hold the bottle down with one hand and slowly lift the cap to open to prevent the resin from splashing out.

UV-LED Coating Resin
Star Drop Gloss 10g / 30g

  • Highly transparency, low viscosity liquid resin for coating

    The light liquid makes it easy to apply thinly. Also, there is little unpleasant odor characteristic of resin.

  • Yellowing-resistant coating resin*

    The UV-LED Coating Resin has strong yellowing resistance after curing.
    *Discoloration characteristic of resin may occur due to aging.

  • Quick curing time

    Just 30 seconds curing by the UV-LED light.
    *Curing time depends on the work environment.

  • Scratch-resistant and shines like glass

    The coating strengthens the surface and provides a hard finish.
    No stickiness after curing due to coating.

Samples
resin piece with lame and holo frakes

Features

  • ■Low viscosity flowing liquid resin
  • ■Hard finish and scratch resistant
  • ■Easy to apply thinly
  • ■Less unpleasant odor characteristic of resin
  • ■Quick curing time
  • ■No stickiness after curing due to coating
  • ■Yellowing-resistant coating resin*
  • ■Beautiful finish when dipped directly into the liquid.
  • ■Brush marks do not stick to the surface, and even can be applied even the detailed areas
  • ■A small amount can be put out with a nozzle

*Discoloration characteristic of resin may occur due to aging.

Coating liquid for thin coating.
It is not suitable for thicker works.

Curing Time

  • ■UV-LED light (6W-9W)　30 - 120 seconds
  • ■UV light (36W)　2 - 4 minutes
  • ■Bright sunlight　30 - 120 seconds
  • ■Cloudy sunlight　3 - 10 minutes

*Curing time depends on the work environment.

Caution

  • ■Temperature becomes high during curing. Do not touch it until it cools down.
  • ■Take care to prevent the resin from adhering to skin, clothing, furniture, etc.
  • ■Coating liquid for thin coating.　It is not suitable for thicker works.
  • ■The resin begins a slow curing reaction even under fluorescent light in a room or in the shade near the window.
  • ■Do not leave this resin out for long periods of time.
  • ■People with sensitive skin or those working in environments requiring caution should wear gloves and glasses.
  • ■White gas may rarely occur during curing.
    This is due to the reaction of some of the resin components to vaporization caused by the curing heat. It is not particularly harmful.
    Please ventilate as usual.
  • ■When applied to Moon Drop resin, the film may peel off due to its unique surface hardness. It is recommended to scratch the surface with sand paper #600 - #1000 before application.

For matte type, shake the bottle gently and slowly before use.
If not used for an extended period of time, the matting agent will precipitate. Use the included flocking tip to slowly stir the mixture before use.

How to use the Coating Resin

Coating in dip resin bottle

Use the Dip Resin for
  • ■Dipping various wire shapes and other small, dried objects directly in.

  1. 1

    Hold the cured resin with a clip and dip it directly into the bottle.

  2. 2

    Take it out and pour off excess resin.
    When applying a thin coating, excess resin can be removed by blowing air from a hand-heater.

  3. 3

    Expose the resin work to a UV-LED light for 360 degrees while turning it.
    The dip resin bottle should be placed away from the light.

  4. 4

    After use, wipe around the bottle and close the lid after putting on the inner cap.
    If the cap does not close properly, close the lid from the top with keeping the cap in place.

・Use gloves to avoid skin contact with resin.
・Close the lid when not in use to avoid light and dust.
・Remove as much dust and debris as possible before dipping.
・Hold the bottle down with one hand and slowly lift the cap to open to prevent the resin from splashing out.