Crank Eyebolt [Silver]

Accessory Parts , Resin Supplies

※Patented by PADICO.

#403056
JAN：4902498730567
Size：W3mm×H9.5mm×D0.8mm
Packaging size：W62mm×H125mm×D2mm
Contents：1 pack / 10 pcs
Weight：2.1g
Color：Silver
Material：Iron, Plating

Made in Japan
Release：May 25th, 2017

480 JPY

BUY NOW

Innovated crank eyebolt.
Easy to set an accessory with.

【Feature 1】No need to drill a hole with a pin vise tool!

Set a crank eyebolt at the edge of the mold and get exposed. No need to drill a hole with a tool.

  • use eye pin Sink as one's hands be taken off.

  • use crank eyebolt Just place it. No sink.

Eye pin needs to stay with tape.
The crank eyebolt stay at the edge without tape.

【Feature 2】Thin plate does not prevent pasting two cured parts!

Set a crankeyebolt at the edge of the mold and get exposed.
No need to drill a hole with a tool.

  • use an eye pin

  • There is a gap on the pin

  • use crank eye bolt

  • Stick without gaps.

The 0.2 ‒ 0.3mm thin plate does not affect pasting two parts.

【Feature 3】Can be fit in a space with 1mm width.

  • See how tinny part the eyebolt fit in the snow crystal mold.

How to Use

  • 1

    Cut off extra tip of the eyebolt to fit in the mold.

  • 2

    Pour resin into mold and set the eyebolt.
    Expose to UV light. Take the piece out of mold.

Go Back