#403327
JAN:4902498733278
Bottle size:φ28mm×H116mm
Package size:W80mm×H190mm×D30mm
Volume:30g
Color:Clear
Ingredients:Acrylic UV LED curable resin
Shrinkage:4%
<Light source>
UV-LED Light (wavelength 405nm)
UV Light (wavelength 365nm)
Made in Japan
Release:May 28th, 2021
980 JPY
New Sun Drop, improved UV-LED curing resin with excellent cost performance & new design.
● One component resin curing with both LED light(405nm) and UV light(36W).
● Less yellowing* issue than previous UV resin.
● Good curing result with silicone mold.
● Curing starts immediately, and is completely finished in 30 - 120 seconds.
● Expose front and back sides to UV light to nsure curing inside of resin.
● Minimize the curvature of the resin during curing.
● Due to low heat shrinkage of 4%, works well with open back bezels.
● Cure well in sunlight.
● The surface of a cured item is not sticky.
* Discoloration ma occur due to aging.
● Quick
UV-LED light, UV light, Sunlight
● Slow
Fluorescent light, Near window (under shade)
● No Reaction
Home LED appliance
Expose front and back sides to the light.
● UV-LED light (6W-9W) 30-120 seconds
● UV light (36W) 2-4 minutes
● Bright sunlight 30-120 seconds
● Cloudy sunlight 3-10 minutes
*Curing period differs with size and seasonal changes.
*Take longer cure time when the colorant resin is used.
Cure with LED light
Less yellowing
Excellent work to fit a cured resin in a frame and an open back bezel due to the low shrinkage.
*The resin is not a glue. It may come off the frame on impact.
Good curing result
・Take care to avoid getting burned when curing.
・Avoid direct contact with skin.
・Should contact with skin occur, remove resin with a tissue and wash with soap and water.
・If product gets into eyes, rinse with clear water for 15 mins and seek medical attention.
・Causes skin irritation.
・Cause serious eye irritation.
・Use in a well-ventilated room.
・Store in a cool, dry area.
・Storage temperature 0-25°C
・Do not use near fire or open flame.